Procedures

Charging

CAUTION:

- Do not perform boost charging.
- The charging current shall be 5.0 A or less.
- The battery shall be charged by referring to the graph 1 of the battery test ( Battery Test).

- Open flame around the battery while charging may cause explosion.

- While charging, pay attention not to cause sparks or other risks.

- Perform the operation in a well-ventilated place.

1. Remove the battery from the vehicle.
2. Set the charging current to 5 amps or less and charge the battery by referencing the charging time in Graph 1 described in the section "battery test". (Refer to Battery Test.)

How to judge the completion of charging

Perform the battery test to check if it is normal.