Idle-Up Operation Check

IDLE-UP OPERATION CHECK

1. Before inspection and adjustment, set vehicle in the following condition:

- Engine coolant temperature: 80 - 90° C (176.0 - 194.0° F)
- Lights, electric cooling fan and accessories: OFF
- Transaxle: Neutral ("N" or "P" position)
- Steering wheel: Straightforward

2. Check whether or not the idle speed is the standard value. Testing and Inspection.
Standard value: 700± 100 r/min


3. Turn on the air conditioning switch and the blower speed selection dial. Engine idling speed should be within the standard value:
Standard value: 800± 100 r/min
NOTE:
It is not necessary to make an adjustment, because the idling speed is automatically adjusted by the ISC system. If, however, a deviation from the standard value occurs for some reason, check the ISC system Testing and Inspection)