Power Door Locks With Selective Unlocking Inspection

POWER DOOR LOCKS WITH SELECTIVE UNLOCKING INSPECTION

Press the unlock switch on the transmitter once to unlock only the driver's door.
Press the unlock switch of the transmitter once again within 2 seconds after the driver's door is unlocked, and check that the front passenger's door and the rear doors are unlocked. If they are not unlocked, carry out troubleshooting. Refer to Symptom Chart.

NOTE:
Press the unlock switch on the transmitter once to unlock only the driver's door.
When the unlock switch of the transmitter is pressed once again more than 2 seconds after the driver's door is unlocked, only the driver's door is unlocked.

NOTE:
The setting of the power door locks with selective unlocking can be changed using the customization function. Confirm which setting is activated before performing these checks. Refer to Configuration Function.