Gear Oil Change

GEAR OIL REPLACEMENT

1. Remove the filler plug.

2. Remove the drain plug and drain oil.

3. Tighten the drain plug to the specified torque.
Tightening torque:
[Type A]
64 ± 4 Nm (47 ± 2 ft-lb)
[Type B]
32 ± 2 Nm (23 ± 2 ft-lb)


4. Add the oil until the level comes to the lower portion of the filler plug hole.
Specified gear oil:
[Type A]
MITSUBISHI Genuine DIA QUEEN LSD gear oil
Amount to use: Approx. 0.55 dm3(0.58 quart)
[Type B]
Hypoid gear oil API classification GL-5, SAE 80
Amount to use: Approx. 0.50 dm3(0.53 quart)


5. Tighten the filler plug to the specified torque.
Tightening torque:
[Type A]
49 ± 9 Nm (36 ± 6 ft-lb)
[Type B]
32 ± 2 Nm (23 ± 2 ft-lb)