Idle-Up Operation Check

IDLE-UP OPERATION CHECK

1. Before inspection and adjustment, set vehicle in the following condition:

- Engine coolant temperature: 80 - 90 °C
(176.0 - 194.0 °F)

- Lights, electric cooling fan and accessories: OFF

- Transmission: Neutral ("N" or "P" position)

- Steering wheel: Straightforward

2. Check whether or not the idle speed is the standard value.
Testing and Inspection. [2.0L ENGINE Non-turbo]
Testing and Inspection. [2.0L ENGINE Turbo]
Testing and Inspection. [2.4L ENGINE]
Standard value: 700 ± 100 r/min [Except 2.4L ENGINE]
Standard value: 650 ± 100 r/min [2.4L ENGINE]


3. Turn on the air conditioning switch and the blower speed selection dial. Engine idling speed should be within the standard value:
Standard value: 750 ± 50 r/min [2.0L ENGINE Non-turbo]
Standard value: 800 ± 50 r/min [2.0L ENGINE Turbo]
Standard value: 800 ± 50 r/min [2.4L ENGINE]
NOTE:
It is not necessary to make an adjustment, because the idling speed is automatically adjusted by the ISC system. If, however, a deviation from the standard value occurs for some reason, check the ISC system Testing and Inspection [2.0L ENGINE Non-turbo] or On-vehicle Service - Idle Speed Check Testing and Inspection [2.0L ENGINE Turbo] or On-vehicle Service - Idle Speed Check Testing and Inspection [2.4L ENGINE])