Engine - Revised Drive Belt Tensioner Checking Procedure
No: TSB-12-11-002DATE: March, 2012
MODEL: See below
SUBJECT:
DRIVE BELT AUTO TENSIONER CHECK - SERVICE MANUAL REVISION
[TSB Revision: TSB-12-11-002]
PURPOSE
Due to changes in the Drive Belt Auto Tensioner the standard value for checking the drive belt tension has changed. This TSB provides the updated information.
AFFECTED VEHICLES
2012 Lancer built on or after February 1, 2012 (U.S.) or February 10, 2012 (Canada)
2012 Lancer Sportback built on or after February 9, 2012 (U.S. and Canada)
2012 Outlander Sport (RVR) built on or after February 1, 2012 (U.S. and Canada)
AFFECTED SERVICE MANUALS
2012 Outlander Sport:
Group 11A >> On Vehicle Service� Drive Belt Auto Tensioner Check >> Function Check
2012 Lancer/Lancer Sportback:
Group 11A >> On Vehicle Service >> Drive Belt Auto Tensioner Check >> Function Check
Group 11E >> On Vehicle Service >> Drive Belt Auto Tensioner Check >> Function Check
Add the following page to Removal and Installation of the following:
2012 Outlander Sport:
Group 11B >> Generator and Ignition System >> Removal and Installation
2012 Lancer/Lancer Sportback:
Group 11B >> Generator and Ignition System >> Removal and Installation
Group 11F >> Generator and Ignition System >> Removal and Installation