Inspection Procedure 7

Inspection Procedure 7: Troubleshooting for noise

CAUTION:

- Check that no noise of external origin is present. Because the signal reception becomes poor indoors, check in the open air. If this check is neglected, the source of noise cannot be determined, resulting in a false recognition. Therefore, be sure to perform this check.

- When implementing the noise prevention, start the prevention from the object causing the strongest noise.

- Check that the radio and CD player main body and others are securely grounded.

COMMENTS ON TROUBLE SYMPTOM

While the engine is running, if noise is generated when the radio or CD is being played, check the relevant item by following the table below, and repair if necessary.