Rear Axle

REMOVAL AND INSTALLATION

CAUTION:

- Be careful not to strike the pole piece at the tip of the rear wheel speed sensor with tools during servicing work.
- The rear hub assembly should not be dismantled.









REMOVAL SERVICE POINTS

[[A]] BRAKE CALIPER ASSEMBLY REMOVAL

1. Remove the brake caliper assembly with brake hose.

2. Secure the removed brake caliper assembly with a wire or other similar material at a position where it will not interfere with the removal and installation of the rear hub assembly.

[[B]] BRAKE DISC REMOVAL





If the brake disc is seized, install M8 x 1.25 bolts as shown, and remove the disc by tightening the bolts evenly and gradually.