Inspection Procedure 5

INSPECTION PROCEDURE 5: Squealing Noise

DIAGNOSIS
STEP 1. Check the drive belt tension.

[1][2]Drive Belt Tension Check and Adjustment [2.4L Engine], On-vehicle service - Drive belt tension check [1][2]Drive Belt Tension Check and Adjustment [3.8L Engine].

Q. Is the drive belt tension incorrect?

YES Adjust the tension [1][2]Drive Belt Tension Check and Adjustment [2.4L Engine], On-vehicle service - Drive belt tension check [1][2]Drive Belt Tension Check and Adjustment [3.8L Engine]). Then go to Step 3 .

NO Go to Step 2.

STEP 2. Check for seizure in the oil pump.

Q. Is there seizure?

YES Replace the part (Refer to Service and Repair [2.4L Engine], Service and Repair [3.8L Engine]). Then go to Step 3 .

NO Go to Step 3.

STEP 3. Retest the system.

Confirm that no noise is generated.

Q. Is there noise?

YES Repeat from Step 1.

NO The procedure is complete.