Enabling/Disabling the Answer Back Function

ENABLING/DISABLING THE ANSWER BACK FUNCTION

When the doors are locked or unlocked by using the transmitter, the dome light will flash/illuminate, the turn-signal lights will flash (hazard answer back), or the horn will sound (horn answer back) to inform the driver.

The hazard answer back and horn answer back functions can be enabled or disabled according to the following procedure:

ENABLING/DISABLING THE HAZARD ANSWER BACK FUNCTION

HOW TO ADJUST HAZARD ANSWER BACK WHEN THE TRANSMITTER IS USED TO LOCK DOORS

1. Remove the ignition key.

2. Press the "unlock" button for 4 to 10 seconds and press the "lock" button during this time.

3. Release the "lock" button and then release the "unlock" button within 10 seconds of pressing the "lock" button in Step 2. The ETACS-ECU tone alarm will sound, indicating that the hazard answer back function can be enabled or disabled when the doors are locked.

- Enable the hazard answer back function when the doors are locked: The ETACS-ECU tone alarm will sound once.
- Disable the hazard answer back function when the doors are locked: The ETACS-ECU tone alarm will sound twice.


HOW TO ADJUST HAZARD ANSWER BACK WHEN THE TRANSMITTER IS USED TO UNLOCK DOORS

1. Remove the ignition key.

2. Press the "unlock" button for 4 to 10 seconds and press the "lock" button during this time.

3. Release the "unlock" button and then release the "lock" button within 10 seconds of pressing the "lock" button in Step 2. The ETACS-ECU tone alarm will sound, indicating that the hazard answer back function can be enabled or disabled when the door are unlocked.

- Enable the hazard answer back function when the doors are unlocked: The ETACS-ECU tone alarm will sound once.
- Disable the hazard answer back function when the doors are unlocked: The ETACS-ECU tone alarm will sound twice.


ENABLING/DISABLING THE HORN ANSWER BACK FUNCTION

1. Remove the ignition key.

2. Press the "lock" button for 4 to 10 seconds and press the "unlock" button during this time.

3. Release the "lock" and "unlock" buttons within 10 seconds of pressing the "unlock" button in Step 2. The ETACS-ECU tone alarm will sound, indicating that the horn answer back function can be enabled or disabled.

- Enable the horn answer back function*: The ETACS-ECU tone alarm will sound once.
- Disable the horn answer back function: The ETACS-ECU tone alarm will sound twice.
- Enable the horn answer back function**: The ETACS-ECU tone alarm will sound three times.
NOTE:

*: The horn will sound if the doors are locked with the keyless entry system.
**: The horn will sound if the doors are already locked and the keyless entry lock button is operated.