Inspection Procedure 4

INSPECTION PROCEDURE 4: Selector Lever cannot be Moved from "P" to "R" Position Smoothly.

TECHNICAL DESCRIPTION (COMMENT)

Key interlock cable, shift lock cable, transaxle control cable, lock cam, or selector lever assembly may be defective.

TROUBLESHOOTING HINTS

- Malfunction of key interlock cable
- Malfunction of shift lock cable
- Malfunction of transaxle control cable
- Malfunction of lock cam
- Malfunction of selector lever assembly

DIAGNOSIS

STEP 1. Check the connection of lock cam and key interlock cable.

Q. Is the connection of lock cam and key interlock cable in good condition?

YES Go to Step 2.

NO Repair the connection of lock cam and shift lock cable. Check that the selector lever can be moved from "P" position to "R" position smoothly.

STEP 2. Check the connection of selector lever assembly and transaxle control cable.

Q. Is the connection of selector lever assembly and transaxle control cable in good condition?

YES Go to Step 3.

NO Repair the connection of selector lever assembly and transaxle control cable. Check that the selector lever can be moved from "P" position to "R" position smoothly.

STEP 3. Check the fit of the lock cam.

Q. Is the lock cam installed correctly?

YES Go to Step 4.

NO Install the lock cam correctly. Check that the selector lever can be moved from
"P" position to "R" position smoothly.

STEP 4. Check the lock cam.

Q. Is the lock cam in good condition?

YES Go to Step 5.

NO Replace the selector lever assembly. Refer to Service and Repair.
Check that the selector lever can be moved from "P" position to "R" position smoothly.

STEP 5. Check the fit of the shift lock cable.

Q. Is the shift lock cable installed correctly?

YES Go to Step 6.

NO Install the shift lock cable correctly. Refer to Service and Repair.
Check that the selector lever can be moved from "P" position to "R" position smoothly.

STEP 6. Check the shift lock cable.

Q. Is the shift lock cable in good condition?

YES Go to Step 7.

NO Replace the shift lock cable. Refer to Service and Repair.
Check that the selector lever can be moved from "P" position to "R" position smoothly.

STEP 7. Check the fit of the key interlock cable.

Q. Is the key interlock cable installed correctly?

YES Go to Step 8.

NO Install the key interlock cable correctly. Refer to Service and Repair.
Check that the selector lever can be moved from "P" position to "R" position smoothly.

STEP 8. Check the key interlock cable.

Q. Is the key interlock cable in good condition?

YES Go to Step 9.

NO Replace the key interlock cable. Refer to Service and Repair.
Check that the selector lever can be moved from "P" position to "R" position smoothly.

STEP 9. Check the fit of the transaxle control cable.

Q. Is the transaxle control cable installed correctly?

YES Go to Step 10.

NO Install the transaxle control cable correctly. Refer to Service and Repair.
Check that the selector lever can be moved from "P" position to "R" position smoothly.

STEP 10. Check the transaxle control cable.

Q. Is the transaxle control cable in good condition?

YES Repair or replace the selector lever assembly. Refer to Service and Repair.
Check that the selector lever can be moved from "P" position to "R" position smoothly.

NO Replace the transaxle control cable. Refer to Service and Repair.
Check that the selector lever can be moved from "P" position to "R" position smoothly.