Inspection Procedure 13

INSPECTION PROCEDURE 13: Oil Leakage from Oil Pump

DIAGNOSIS
STEP 1. Check the oil pump body for damage.

Q. Is there damage?

YES Replace the part (Refer to Service and Repair [2.4L Engine], Service and Repair [3.8L Engine]). Then go to Step 3 .

NO Go to Step 2.

STEP 2. Check the O-ring or oil seal for damage.

Q. Is there damage?

YES Replace the part (Refer to Service and Repair [2.4L Engine], Service and Repair [3.8L Engine]). Then go to Step 3 .

NO Go to Step 3.

STEP 3. Retest the system.

Check that no oil is leaking.

Q. Is there oil leakage?

YES Repeat from Step 1.

NO The procedure is complete.