Oil Filter: Description and Operation

ENGINE OIL FILTER (REPLACE)

The quality of replacement filters varies considerably.
Only high quality filters should be used to assure most efficient service.

Genuine oil filters require that the filter is capable of withstanding a pressure of 1,800 kPa (261 psi) are high quality filters and are recommended as follows:


Mitsubishi Oil Filter Part Number:
[2.4L Engine]
MD136466, MD322508, MD352627 or MD356000
[3.8L Engine]
MD321589 or MD352627


Engine Oil Filter Selection

This vehicle is equipped with a full-flow, throw-away oil filter.

The same type of filter is recommended as a replacement filter for this vehicle. It is possible, particularly in cold weather, that this vehicle may develop high oil pressure for a short duration. Make sure that any replacement filter used on this vehicle is a high-quality filter. The filter must withstand a pressure of 1,800 kPa (261 psi) [manufacturer's specifications] to avoid filter and ultimately engine damage. The following is a high-quality filter and is strongly recommended for use on this vehicle: Mitsubishi Engine Oil Filter Part number MD136466, MD322508, MD352627 or MD356000 [2.4L ENGINE] and MD321589 or MD352627 [3.8L ENGINE].