Inspection Procedure 1

INSPECTION PROCEDURE 1: Difficult Locking and Unlocking

DIAGNOSIS
STEP 1. Check the release cable routing.

Q. Is the release cable routed correctly?

YES Go to Step 3.

NO Re-route the release cable. Then go to Step 2.

STEP 2. Check the engagement of the liftgate latch and liftgate striker.

Q. Are the liftgate latch and liftgate striker engaged correctly?

YES Then go to Step 3.

NO Align the liftgate latch and liftgate striker (Refer to Adjustment of Liftgate Latch and Striker).

STEP 3. Retest the system.

Q. Does the liftgate lock operate easily?

YES The procedure is complete.

NO Return to Step 1.