Vehicle Damage Warnings

INDIVIDUAL COMPONENT SERVICE

WARNING:
- If heat damage occurs during paint work, remove the SRS-ECU, the air bag modules, the clock spring, front seats, impact sensor and the seat belt with pre-tensioner. Recheck the SRS system operability after reinstalling them.
- SRS-ECU, air bag modules, clock spring, front seats, impact sensor: 93° C (200° F) or more
- Seat belt with pre-tensioner: 90° C (194° F) or more

- If the SRS components are removed for the purpose of inspection, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.

If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure in this section. (Front impact sensor:, refer to SRS-ECU:, refer to Driver's air bag modules and clock spring: refer to [except for RALLIART], refer to [RALLIART], Passenger's (front) air bag module, refer to Side-airbag module: [except for RALLIART], refer to [RALLIART], Knee air bag module:, refer to Side impact sensor:, refer to Curtain air bag module:, refer to Seat belt with pre-tensioner.