Active Stability Control System (ASC)

REMOVAL AND INSTALLATION

[FRONT]

As for removal and installation of the front wheel speed sensor, refer to Wheel Speed Sensor Removal and Installation Anti-Lock Braking System (ABS).

[REAR FWD]

As for removal and installation of the rear wheel speed sensor, refer to Wheel Speed Sensor Removal and Installation Anti-Lock Braking System (ABS).

[REAR AWD]

CAUTION:
The vehicle speed detection encoder collects any metallic particle easily, because it is magnetized. Make sure that the encoder should not collect any metallic particle. Check that there is not any trouble prior to reassembling it.













NOTE:
The vehicle speed detection encoder is integrated with the rear wheel hub assembly, which is non-serviceable.

INSTALLATION SERVICE POINT

]]A[[
REAR WHEEL SPEED SENSOR GROMMET INSTALLATION





Install the rear wheel speed sensor grommet to the body panel snugly as shown in the figure.