Inspection Procedure 6

INSPECTION PROCEDURE 6: Door does not Open or Close Completely

DIAGNOSIS
STEP 1. Check the door hinge position.

Q. Is the door hinge position correct?

YES Go to Step 2.

NO Adjust the door hinge position. Refer to Adjustments. Then go to Step 4.

STEP 2. Check the door.

Q. Is the door in good condition?

YES Go to Step 3.

NO Repair or replace door, then go to Step 4.

STEP 3. Check the grease.

Q. Is the door check or door hinge grease sufficient?

YES Go to Step 4.

NO Apply the grease, then go to Step 4.

STEP 4. Retest the system.

Q. Does the door open and close normally?

YES The procedure is complete.

NO Return to Step 1.