Ignition Switch: Description and Operation

GENERAL DESCRIPTION

IGNITION KEY REMINDER TONE ALARM

The ignition key reminder tone alarm will sound under the following condition, and warn the driver to remove the ignition key.

- The driver's door is opened when the ignition switch is at "LOCK" (OFF) or "ACC" position without removing the ignition key.
However, the light reminder tone alarm will take precedence over this function.

DOOR LOCK PREVENTION FUNCTION

If the key is left in the ignition switch while the driver's door opened or the assistant door opened, all door are automatically unlock to prevent locking the ignition key in the vehicle after door is locked.

IMMOBILIZER SYSTEM

The engine immobilizer system prevents the engine from starting and immobilizes the vehicle if a key other than the key registered for that vehicle is used in an attempt to start the engine after forced entry. The engine immobilizer system consists of the ignition key, the key ring antenna, the ETACS-ECU (immobilizer-ECU), and the powertrain control module (PCM). It has these functions:
The system is designed to be maintenance-free because the power source for the transponder is supplied by the ETACS-ECU (immobilizer-ECU) via the key ring antenna. Two ignition keys are provided, and up to eight keys can be registered to one vehicle (one receiver) as needed. There are 4 billion combinations for the encrypted code. In addition, one part of the code is changed each time the key is switched on, which improves security by preventing theft using a copied encrypted code.

CONSTRUCTION DIAGRAM





OPERATION

With the ignition switch "ON" position, the immobilizer system operates as follows.