Supplemental Restraint System (SRS) - Air Bag
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - AIR BAG
WARNING
- Improper service maintenance of any SRS air bag can lead to unintended operations of the SRS system or serious injury.
- If heat damage occurs during paint work, remove the SRS-ECU, the air bag modules, the clock spring, the front impact sensor, the side impact sensor, and the seat belt with pretensioner.
- SRS-ECU, air bag module, clock spring, front impact sensor, side impact sensor: 93 degrees (200 degrees F) or more
- Seat belt with pre-tensioner: 90 degrees C (194 degrees F) or more
- Service or maintenance of any SRS air bag components or related components must be performed only at an authorized MITSUBISHI dealer.
- Before beginning service or maintenance of any SRS air bag components or related components, MITSUBISHI dealer personnel must thoroughly review the Service Manual (especially SRS AIR BAG).