Inspection Procedure 6

INSPECTION PROCEDURE 6: Door does not Open or Close Completely

DIAGNOSIS
STEP 1. Check the door hinge position.

Q. Is the door hinge correct?

YES Go to Step 2.

NO Adjust the door hinge (Refer to Adjustments). Then go to Step 4.

STEP 2. Check the door for damage.

Q. Is the door in good condition?

YES Go to Step 3.

NO Repair or replace the door, then go to Step 4.

STEP 3. Check lubrication.

Q. Are the door check and door hinge sufficiently lubricated?

YES Go to Step 4.

NO Apply grease, then go to Step 4.

STEP 4. Retest the system.

Q. Does the door open and close completely?

YES The procedure is complete.

NO Return to Step 1.