Inspection Procedure 1

INSPECTION PROCEDURE 1: Water Leak Through Door Window Glass

DIAGNOSIS
STEP 1. Check the window glass runchannel.

Q. Is the window glass runchannel in good condition?

YES Go to Step 2.

NO Replace the runchannel, then go to Step 4.

STEP 2. Check the door window glass installation.

Q. Is the door window glass installed correctly?

YES Go to Step 3.

NO Reinstall the door window glass (Refer to Service and Repair). Then go to Step 4.

STEP 3. Check the clearance at the top of the door window glass.

Q. Is the clearance at the top of the door window glass correct?

YES Go to Step 4.

NO Adjust the door window glass (Refer to Adjustments). Then go to Step 4.

STEP 4. Retest the system.

Q. Is any water leaking?

YES Return to Step 1.

NO The procedure is complete.