Keyless Entry System Inspection

KEYLESS ENTRY SYSTEM INSPECTION

Check the following items. If defective, refer to Diagnosis Symptom Chart.

1. Operate the transmitter to check that the doors, liftgate [ECLIPSE] and trunk lid [ECLIPSE SPYDER] can be locked and unlocked.

- When the unlock button is pressed once, the driver's door will be unlocked. Then when the button is pressed once again, all the doors, liftgate[ ECLIPSE] and trunk lid[ ECLIPSE SPYDER] will be unlocked.

2. Press the liftgate button of transmitter twice (press once, and then press again within 5 seconds) and confirm that the liftgate opens [ECLIPSE].

3. Press the trunk lid button of transmitter twice (press once, and then press again within 5 seconds) and confirm that the trunk lid opens [ECLIPSE SPYDER].

4. Operate the transmitter to check that the answer-back function works in response to doors, liftgate [ECLIPSE] and trunk lid [ECLIPSE SPYDER] locking/unlocking.
NOTE:
The adjustment function allows you to change the hazard answer-back setting as follows.
Prior to that check, confirm which setting is activated.
1. Turn-signal lights: Flash once when doors, liftgate [ECLIPSE] and trunk lid [ECLIPSE SPYDER] are locked, and twice when unlocked (initial setting).

2. Turn-signal lights: Flash once when doors, liftgate [ECLIPSE] and trunk lid [ECLIPSE SPYDER] are locked, but does not flash when unlocked.

3. Turn-signal lights: Do not flash when doors, liftgate [ECLIPSE] and trunk lid [ECLIPSE SPYDER] are locked, but flash twice when unlocked.

4. Turn-signal lights: Do not flash when doors, liftgate [ECLIPSE] and trunk lid [ECLIPSE SPYDER] are locked and unlocked.

NOTE:
The adjustment function allows you to change the horn answer-back setting as follows. Prior to that check, confirm which setting is activated.
5. Horn: Sounds once when the lock button is pressed.

6. Horn: Sounds once when the lock button is pressed with the doors locked (initial setting).

7. Horn: Does not sound.