How to Adjust the Fully Closed Position [Forced Fully Closed Position Adjustment Mode]

LEARNING PROCEDURES OF THE SUNROOF FULLY CLOSED POSITION

HOW TO ADJUST THE FULLY CLOSED POSITION [FORCED FULLY CLOSED POSITION ADJUSTMENT MODE]

1. With the sunroof lid glass stopped (the position of the sunroof lid glass can be any position between fully opened and fully closed), press and hold the up switch.

NOTE: If operating the up switch moves the sunroof normally, use the open switch to fully open the sunroof lid glass. After the sunroof lid glass stops, press and hold the up switch.

2. Use the up switch to set the sunroof lid glass to the tilt-up position. The sunroof lid glass activates for approximately 30 mm and stops automatically when the switch is pressed once. Repeat this operation until the tilt-up position is reached and hold there for 3 seconds so that the fully closed position learning is completed.