Windshield Washer Spray Nozzle: Testing and Inspection

WINDSHIELD WASHER FLUID EJECTION CHECK

NOTE: Use the special tool, washer nozzle adjustment tool (MB992326) to adjust the splashing points of the washer nozzles if necessary.







Adjustment of the mist type washer nozzle injection position

CAUTION:
- Do not use tools other than the special tool (MB992326) to adjust the injection angle because the washer nozzle may get damaged.
- Adjust the splashing position within the specified adjustment range, otherwise the windshield cannot be washed properly.

1. Use the special tool, washer nozzle adjustment tool (MB992326) to adjust the splashing points of the nozzle.







2. Insert the mist type washer nozzle adjusting side of the special tool (MB992326) into the injection part of the mist type washer nozzle as shown in the figure (A).







3. Move the special tool (MB992326) up and down to adjust the angle of the washer nozzle as shown in the figure (B).

NOTE: If the washer nozzle cannot be moved smoothly, adjust the angle while pressing the special tool (MB992326) against the washer nozzle.