Inspection Procedure 2: Noise Due to Excessive Play of Wheel In Turning Direction

INSPECTION PROCEDURE 2: Noise Due to Excessive Play of Wheel in Turning Direction

DIAGNOSIS

STEP 1. Check for play in the output shaft and side gear serration, the driveshaft and side gear serration, or the driveshaft and front hub serration.
Q: Is the play found?
YES: Replace the part. Then go to Step 2.
NO: The procedure is complete.

STEP 2. Retest the system.
Q: Is the abnormal noise eliminated?
YES: The procedure is complete.
NO: Repeat from Step 1.