Inspection Procedure 13: The Shift Shock Is Large

INSPECTION PROCEDURE 13: The shift shock is large.

COMMENTS ON TROUBLE SYMPTOM
The mechatronic assembly, clutch assembly, or transaxle assembly may have a problem.

PROBABLE CAUSES
^ Malfunction of the mechatronic assembly
^ Malfunction of the clutch assembly
^ Malfunction of the transaxle assembly

DIAGNOSTIC PROCEDURE

STEP 1. Retest the system.
Q: Does a malfunction take place again?
YES: Replace the mechatronic assembly. Then go to Step 2.
NO: Intermittent malfunction.

STEP 2. Retest the system.
Q: Does a malfunction take place again?
YES: Replace the clutch assembly. Then go to Step 3.
NO: Intermittent malfunction.

STEP 3. Retest the system.
Q: Does a malfunction take place again?
YES: Replace the transaxle assembly.
NO: Intermittent malfunction.