Automatically Shifted Manual Transmission/Transaxle: Technical Service Bulletins

• ASMT - Revised Diagnostics and Overhaul Procedures
  • Overview
  • Special Tools
  • Diagnosis <TC-SST>
    • Section 22-3 Thru Section 22-60
    • Section 22-61 Thru Section 22-85
    • Section 22-86 Thru Section 22-127
    • Section 22-128 Thru 22-170
  • On-Vehicle Service
  • Transaxle Assembly
  • Oil Pan
  • Mechatronic Assembly, Manual Control Lever
  • Transaxle Case Oil Seal
  • Oil Cooler
  • Oil Filter
  • Transaxle <Overhaul>
• ASMT - TC-SST Diagnostics and Repair Procedures
  • Overview
  • TC-SST Operation Overview
  • Diagnosis and Repair Overview
    • Information
    • Scan Tool Setup
    • Copy Coding From Original TCM to MUT-III
    • Mechatronic Assembly Replacement Procedures
    • Program New Transmission Control Module (TCM)
    • VIN Writing to the New Transmission Control Module (TCM)
    • Copy Coding From MUT-III to Replacement TCM
    • Perform Teach-In Procedure on New TCM
    • Reprogram 2008 Lancer Evolution TCM With Correct Software
• TC-SST Transmission - Corrected Drain Plug Locations
• ASMT - Clutch Assembly Replacement Procedures
  • Overview
  • Procedure
    • Scan Tool Setup
    • Clutch Removal and Installation
    • Program New Transmission Control Module (TCM)
    • Perform "Teach-In" Procedure For Clutch Replacement
    • Reprogram TCM Using Software Version 0001 W/ Correct Software