Copy Coding From MUT-III to Replacement TCM

1. Click the ELC-AT/CVT/TC-SST button.
2. Click the check mark to continue.





3. Click the Coding button.





4. Click the On Vehicle Coding button.

5. Click the check mark in the On Vehicle





Function dialog box to continue.





6. Type in the 17 digit VIN. There is no option to have MUT-III auto fill the VIN for you.

Double check the VIN before proceeding.
7. Click the check mark to continue.





8. Highlight the correct file based on the VIN and date when the Copy Coding began.

NOTE:
Highlight the file only as shown. DO NOT check the box in the "DEL" column. Doing so will delete the file when the check mark is clicked.
9. Click the check mark to continue.

10. Compare the Current and Coding files.





They should match each other.
11. Click the check mark to continue.





12. Click the check mark in the On Vehicle Coding dialog box.

NOTE:
If Download Coding was performed instead of Copy Coding, be certain to select the proper port or dealer installed accessories. DTCs may be set and accessory operation may be affected if not correctly selected.

13. Click the check mark in the dialog box to continue





14. Click the check mark in the On Vehicle Coding dialog box when coding is complete.

15. Continue to the Teach-In procedure that follows.