Vehicle Damage Warnings

INDIVIDUAL COMPONENT SERVICE

WARNING:
- If heat damage occurs during paint work,remove the SRS-ECU, the air bag modules,the clock spring, front seats, impact sensor and the seat belt with pre-tensioner.Recheck the SRS system operability after reinstalling them.
- SRS-ECU, air bag modules, clockspring, front seats, impact sensor: 93 °C (200 °F) or more
- Seat belt with pre-tensioner: 90 °C (194 °F) or more
- If the SRS components are removed for the purpose of inspection, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.

If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc.,follow the appropriate procedure in this section.(Front impact sensor: refer to SRS-ECU:refer to Air bag modules and clockspring: refer to Side-airbag module: refer to Front Seat Assembly Knee air bag module: refer to Side impact sensor: refer to Curtain air bag module: refer to Seat belt with pre-tensioner).