Shifting Conditions For the Fully Closed Position Adjustment Mode
LEARNING PROCEDURES OF THE SUNROOF FULLY CLOSED POSITIONSHIFTING CONDITIONS FOR THE FULLY CLOSED POSITION ADJUSTMENT MODE
- When shifting to the forced fully closed position adjustment mode How to shift to the forced fully closed position adjustment mode
1. Turn the ignition switch to the "ON" position.
2. With the roof lid glass stopped (the position of the roof lid glass can be any position between fully opened and fully closed), press and hold the up switch for 10 seconds.
- When the anti-trap function (safety mechanism) is activated consecutively five times
- When the position information may be incorrect due to abnormal power supply during the sunroof operation
NOTE: When installing the sunroof assembly, or installing/replacing the sunroof motor assembly, operate the forced fully closed position adjustment mode to adjust the fully closed position.