Turn Signal Bulb: Service and Repair

FRONT TURN-SIGNAL AND PARKING LIGHT BULB

1. Disconnect the front turn-signal light and parking light connector.







2. Remove the socket with the bulb by turning it counterclockwise as shown.
3. Twist bulb counterclockwise and pull out the bulb from the socket, and then replace the bulb.
4. Install the socket to the headlight by push and twisting it clockwise.

FRONT SIDE-MARKER LIGHT BULB

1. Disconnect the front side-marker light connector.







2. Remove the socket with the bulb by turning it counterclockwise as shown.
3. Pull out the bulb from the socket, and then replace the bulb.
4. Install the socket to the headlight by push and twisting it clockwise.