Power Steering Line/Hose: Service and Repair
POWER STEERING HOSESREMOVAL AND INSTALLATION
Pre-removal & Post-installation Operation:
Removal Steps 1-14:
INSTALLATION SERVICE POINTS
]]A[[ RETURN HOSE/ HOSE CLAMP/ CLIP INSTALLATION
1. Align the marking as shown in the figure and connect the return hose.
2. Align the return hose marking within the area shown in the figure and connect the return hose.
3. Using clip and hose clamp align the return hose marking within the area shown in the figure and connect the return hose.
]]B[[ PRESSURE HOSE ASSEMBLY INSTALLATION
Align the pressure hose plate as shown in the figure and connect pressure hose assembly.
]]C[[ SUCTION HOSE INSTALLATION
1. Align the oil reservoir side suction hose marking within the area shown in the figure and connect the suction hose.
2. Align the oil pump side suction hose marking within the area shown in the figure and connect the suction hose.