Rear Axle

REAR AXLE HUB ASSEMBLY

REMOVAL AND INSTALLATION

Removal Steps 1-8:

CAUTION
^ Be careful not to strike the pole piece at the tip of the rear wheel speed sensor with tools during servicing work.
^ The rear hub assembly should not be dismantled.

REMOVAL SERVICE POINTS

[[A]] CALIPER ASSEMBLY REMOVAL
1. Remove the caliper assembly with brake hose.
2. Secure the removed caliper assembly with a wire or other similar material at a position where it will not interfere with the removal and installation of the rear hub assembly.

[[B]] BRAKE DISC REMOVAL





If the brake disc is seized, install M8 � 1.25 bolts as shown, and remove the disc by tightening the bolts evenly and gradually.