Clutch Pedal Assembly: Service and Repair

NOTE: This article contains changes called out in TSB-08-21-001.


CLUTCH PEDAL AND MASTER CYLINDER

REMOVAL AND INSTALLATION

CAUTION: Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which may have grease on them.

Pre-removal & Post-installation Operation:

Removal Steps 1-10:

REMOVAL SERVICE POINT

[[A]] CLUTCH MASTER CYLINDER AND CLUTCH PEDAL ASSEMBLY REMOVAL
Remove the clutch master cylinder and clutch pedal assembly from inside the vehicle.

INSTALLATION SERVICE POINT

]]A[[ CLUTCH SWITCH INSTALLATION





Install the clutch switch at the specified dimension when the clutch pedal is released.

]]B[[ CLUTCH INTERLOCK SWITCH INSTALLATION





Install the clutch interlock switch at the specified dimension when the clutch pedal is released.