Rear Axle

HUB BOLT REPLACEMENT

Required Special Tools:
^ MB990767: Front Hub and Flange Yoke Holder
^ MB991618: Hub Bolt Remover

1. Remove the brake drum. [Vehicles with drum brake]
2. Remove the caliper assembly, and suspend the caliper assembly with a wire and remove the brake disc. [Vehicles with disc brake]





3. Use special tool MB991618 to remove the hub bolts.





4. Install the plain washer to the new hub bolt, and install the bolt with a nut while holding the hub with special tool MB990767.
5. Install the brake disc, caliper assembly and tighten the caliper assembly mounting bolts to the specified torque.
[Vehicles with disc brake]

Tightening torque: 55±5 Nm (41±3 ft-lb)