Inspection Procedure 6

INSPECTION PROCEDURE 6: Door does not Open or Close Completely

DIAGNOSIS

STEP 1.Check the door hinge position.

Q: Is the door hinge correct?

YES : Go to Step 2.

NO : Adjust the door hinge. Then go to Step 4.

STEP 2.Check the door.

Q: Is the door in good condition?

YES : Go to Step 3.

NO : Repair or replace door, then go to Step 4.

STEP 3.Check the grease.

Q: Is the door check or door hinge grease sufficient?

YES : Go to Step 4.

NO : Apply the grease, then go to Step 4.

STEP 4.Retest the system.

Q: Does the door open and close correctly?

YES : The procedure is complete.

NO : Return to Step 1.