Inspection Procedure 3

INSPECTION PROCEDURE 3: Water Leak Through Door Edge

DIAGNOSIS

STEP 1.Check the weatherstrip.

Q: Is the weatherstrip in good condition?

YES : Go to Step 2.

NO : Replace the weatherstrip, then go to Step 3.

STEP 2.Check the door fit (alignment).

Q: Is the door fit (alignment) correct?

YES : Go to Step 3.

NO : Adjust the door fit. Then go to Step 3.

STEP 3.Retest the system.

Q: Is any water leaking?

YES : Return to Step 1.

NO : The procedure is complete.