CVT

DTC U0141: CAN Time-out Error (ETACS)

DIAGNOSTIC FUNCTION
TCM determines that malfunction is present if the periodic communication data sent from ETACS-ECU via the CAN bus lines is abnormal.

JUDGEMENT CRITERIA
TCM cannot receive the periodic communication data from ETACS-ECU.

PROBABLE CAUSES
^ Malfunction of the CAN bus
^ Malfunction of ETACS-ECU
^ Malfunction of TCM

DIAGNOSTIC PROCEDURE

STEP 1. M.U.T.-III CAN bus diagnostics
Use M.U.T.-III to perform the CAN bus diagnosis.

Q: Is the check result normal?
YES: Go to Step 2.
NO: Repair the CAN bus lines.

STEP 2. M.U.T.-III diagnosis code
Check if ETACS-related diagnosis code is set.

Q: Is the ECU-related diagnosis code set?
YES: Carry out the appropriate troubleshooting.
NO: Go to Step 3.

STEP 3. Symptom recheck after erasing diagnosis code

Q: Is the check result normal?
YES: Intermittent malfunction
NO: Replace TCM.