C1395

DTC C1395: Brake fluid filling not completed

CAUTION
If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be set. Prior to this diagnosis, diagnose the CAN bus lines.

DTC SET CONDITIONS
This diagnostic trouble code is set when the brake fluid is not filled in the hydraulic unit.

PROBABLE CAUSES
^ Different hydraulic unit (For delivery to factory)
^ ABS-ECU malfunction

DIAGNOSIS

Required Special Tools:
^ MB991958: Scan Tool (M.U.T-III Sub Assembly)
^ MB991824: V.C.I.
^ MB991827: M.U.T.-III USB Cable
^ MB991910: M.U.T.-III Main Harness A

STEP 1. M.U.T.-III CAN bus diagnostics
Use scan tool to diagnose the CAN bus lines.
Q: Is the check result normal?
YES: Go to Step 2.
NO: Repair the CAN bus lines. On completion, go to Step 2.

STEP 2. Diagnostic trouble code recheck after resetting CAN bus lines
Q: Is DTC C1395 set?
YES: Replace the ABS-ECU.
NO: The procedure is complete.