Transmission Cooler: Service and Repair

The Content Of This Article Reflects The Changes Identified In TSB - 09-22-006

OIL FILTER

REMOVAL AND INSTALLATION

Pre-removal and Post-Installation Operation
Engine room side cover removal and installation.

The Content Of This Image Reflects The Changes Identified In TSB 09-22-006:

Removal steps
<> >>A<< - Transmission oil draining and refilling
1. Oil cooler hose assembly connection
2. Hose clip
3. Oil filter case assembly
4. Oil filter
5. Oil filter bracket assembly

REMOVAL SERVICE POINT

<> TRANSMISSION OIL DRAINING
Drain the oil in the transaxle assembly and the oil cooler.

INSTALLATION SERVICE POINT

>>A<< TRANSMISSION OIL REFILLING

CAUTION: Refill 6.2 dm3 (6.6 qt) of the transmission oil.

NOTE: The oil capacity of the oil cooler assembly and the oil cooler hose is 0.6 dm3 (0.6 qt), and the oil capacity of the oil filter case assembly is 0.1 dm3 (0.1 qt).