Camshaft Bearing

CAMSHAFT BEARING CAP





Tighten each camshaft bearing cap mounting bolt to the specified torque in the order of number shown in the figure in two or three steps.
Specified torque 12 ± 1 Nm (106 ± 8 in-lb)





Tighten each front camshaft bearing cap mounting bolt to the temporarily torque of 17 ± 3 Nm (14 ± 2 ft-lb) in the order shown 1).

Tighten each front camshaft bearing cap mounting bolt to the specified torque in the order shown 2).
Specified torque 30 ± 2 Nm (22 ± 1 ft-lb)