Vehicle Damage Warnings

INDIVIDUAL COMPONENT SERVICE

WARNING:
- If heat damage occurs during paint work, remove the SRS-ECU, the air bag modules, the clock spring, front seats, impact sensor and the seat belt with pre-tensioner. Recheck the SRS system operability after reinstalling them.
- SRS-ECU, air bag modules, clock spring, front seats, impact sensor: 93 °C (200 °F) or more
- Seat belt with pre-tensioner: 90 °C (194 °F) or more
- If the SRS components are removed for the purpose of inspection, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.

If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure in this section. (Front impact sensor, SRS-ECU, Air bag modules and clock spring, Side-airbag module, Front Seat Assembly, Knee air bag module, Curtain air bag module, Seat belt with pre-tensioner).