Power Steering Line/Hose: Service and Repair

POWER STEERING HOSES

REMOVAL AND INSTALLATION

Pre-removal & Post-installation Operations:

Removal Steps 1-16:

INSTALLATION SERVICE POINTS

]]A[[ COOLER TUBE ASSEMBLY/RETURN TUBE ASSEMBLY INSTALLATION





Install by aligning the mating marks of cooler tube assembly and return tube assembly.

]]B[[ RETURN HOSE INSTALLATION





1. Install the return hose by aligning the mating marks.





2. Install the return hose with its marking located as shown in the figure.





3. Using clips and hose clamps, install the return hose with its marking located as shown in the figure.

]]C[[ PRESSURE HOSE INSTALLATION





Install the pressure hose plate with its marking located as shown in the figure.

]]D[[ SUCTION HOSE INSTALLATION





1. Install the suction hose with its marking located as shown in the figure.





2. Install the suction hose with its marking located as shown in the figure.