(TC-SST)

DTC U0136: AWC Time-out Error

CAUTION:
^ If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be set. Prior to this diagnosis, diagnose the CAN bus lines.
^ Whenever the ECU is replaced, ensure that the CAN bus lines are normal.

DESCRIPTIONS OF MONITOR METHODS
The periodic communication data from the engine control module cannot be received.

PROBABLE CAUSES
^ The CAN bus line is defective.
^ Malfunction of AWC-ECU
^ Malfunction of TC-SST-ECU

DIAGNOSTIC PROCEDURE

STEP 1. Scan tool CAN bus diagnostics
Using the scan tool, diagnose the CAN bus lines.

Q: Is the check result normal?
YES: Go to Step 2.
NO: Repair the CAN bus lines.

STEP 2. Scan tool diagnostic trouble code
Check the AWC diagnostic trouble code.

Q: Is the DTC set?
YES: Perform the relevant troubleshooting.
NO: Go to Step 3.

STEP 3. Check whether the DTC is reset.

Q: Is DTC No. U0136 set?
YES: Replace the TC-SST assembly.
NO: Intermittent malfunction.