Crankshaft Main Bearing: Specifications
Crankshaft Main Bearing
Bearing cap bolt 25 ± 2 Nm (18 ± 1 ft-lb) + 90°
Tighten the bolts to the specified torque in the tightening sequence shown.
Bearing cap bolt shank length
Limit 71.1 mm (2.79 in)
Bearing cap bolt 25 ± 2 Nm (18 ± 1 ft-lb) + 90°
Tighten the bolts to the specified torque in the tightening sequence shown.
Bearing cap bolt shank length
Limit 71.1 mm (2.79 in)