Inspection Procedure 21

INSPECTION PROCEDURE 21: Radio: Distortion on FM only.

DIAGNOSIS

STEP 1. Check that the distortion is present when the radio is tuned to another station.

Q: Does the distortion persist when the radio is tuned to another station?

YES : Go to Step 2.

NO : The signal from that station is too weak.

STEP 2. Relocate the reception area and check the radio.

Q: When relocating the reception area does the distortion increase or decrease?

YES : The cause may be multipath or fading noise. Multipath noise is the echo that occurs when the broadcast signal is reflected by a large obstruction and enters the receiver with a slight time delay relative to the direct signal (repetitious buzzing). A fading or buzzing noise may occur when the broadcast beam is disrupted by obstructing objects and the signal strength fluctuates within a narrow range.

NO : Replace the radio and CD player or radio and CD player with CD changer. Check that the distortion is resolved.