Inspection Procedure 18

INSPECTION PROCEDURE 18: Radio: No reception (AM).

DIAGNOSIS

STEP 1. Check to see if inspections are taking place in an area exposed to special electric fields.

Q: Are inspections taking place under special electric field conditions? (underground garage, inside a building, etc.)?

YES : Go to Step 2.

NO : Go to Step 3.

STEP 2. Move the vehicle and check the radio.

Move the vehicle to a good reception area that is not exposed to special electric fields.

Q: Is reception of the strongest radio frequency possible within the area?

YES : There is no action to be taken.

NO : Go to Step 3.

STEP 3. Tune the radio, and then check it.

Q: Did the sensitivity improve after tuning?

YES : There is no action to be taken.

NO : Go to Step 4.

STEP 4. Check the connection of the antenna plug and radio and CD player or radio and CD player with CD changer.

Q: Is the antenna plug thoroughly connected to the radio and CD player or radio and CD player with CD changer?

YES : Go to Step 5.

NO : Thoroughly connect the antenna plug and the radio and CD player or radio and CD player with CD changer. The radio should sound normally.

STEP 5. Check by replacing radio and CD player or radio and CD player with CD changer.

Q: Do the other radio and CD player or radio and CD player with CD changer work normally?

YES : Repair or replace the original radio and CD player or radio and CD player with CD changer. The radio should sound normally.

NO : Either repair or replace the antenna assembly. The radio should sound normally.