Removal and Replacement

IGNITION SWITCH

Removal Steps 1-6:

REMOVAL AND INSTALLATION

WARNING:
- Before removing the steering wheel, air bag module assembly and clock spring refer to Airbag Systems, Service Precautions and Air Bag Module and Clock Spring.
- When removing and installing the steering wheel, do not let it bump against the air bag module.

CAUTION: When the steering lock cylinder is replaced, register the encrypted code.

REMOVAL SERVICE POINTS

<> STEERING COLUMN COVER REMOVAL.

1. Rotate the steering wheel with a slightly from side-to-side to access and remove the mounting screws.

<> STEERING LOCK CYLINDER REMOVAL

1. Insert the key in the steering lock cylinder and turn it to the "ACC" position.
2. Using a small Phillips head screwdriver, pull the steering lock cylinder toward you.