Turn Signal Lamp: Service and Repair

FRONT TURN-SIGNAL AND PARKING LIGHT BULB
1. Disconnect the front turn-signal light and parking light connector.
2. Remove the socket with the bulb by turning it counterclockwise as shown.

CAUTION: Do not touch the surface of the bulb with hands or dirty gloves as the bulb may fail after a short time. If the surface does become dirty, clean it with alcohol or thinner, and let it dry thoroughly before installing.

3. Twist bulb counterclockwise and pull out the bulb from the socket, and then replace the bulb.
4. Install the socket to the headlight by push and twisting it clockwise.