Drive Belts, Mounts, Brackets and Accessories: Service and Repair

ENGINE ROLL STOPPER AND CENTERMEMBER

REMOVAL AND INSTALLATION

<2.4L ENGINE>

CAUTION:* Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full weight of the engine on the vehicle body.

Pre-removal and Post-installation Operation:

<3.8L ENGINE>

CAUTION:* Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full weight of the engine on the vehicle body.

Pre-removal and Post-installation Operation:

INSTALLATION SERVICE POINTS

]]A[[ ENGINE REAR ROLL STOPPER BRACKET INSTALLATION





Tighten the bolts in the following sequence:
1. Tighten bolts E finger tight.
2. Tighten bolt C and then tighten bolts D.
3. Tighten bolts E.

]]B[[ ENGINE FRONT ROLL STOPPER BRACKET INSTALLATION





Install the engine front roll stopper bracket so that its hole points towards the front side of the vehicle.